Frequent question: What is a door rail joint?

Frame and panel construction, also called rail and stile, is a woodworking technique often used in the making of doors, wainscoting, and other decorative features for cabinets, furniture, and homes. … The vertical members of the frame are called stiles while the horizontal members are known as rails.

What is a door rail?

Rails are the horizontal pieces of the door. Rails are important to consider for hardware mounted to the top of bottom of the door.

What is a lock rail on a door?

: a horizontal stiffening member of a paneled door in or to which the lock is fixed.

What is the top rail of a door?

Parts of a door – glossary of terms

Top rail – The top rail is the horizontal piece that sits across the very top of the door. Freeze rail – Similar to the top rail, except it sits horizontally across the next divide down between the panels on the door. This is often at eye height and not all doors have a cross rail.

IT IS INTERESTING:  How do you unlock a door without a key in 5 seconds?

What are parts of a door called?

Door part names

  • Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head. …
  • Sill. The door sill is the very bottom part of the door frame that rests on the floor.
  • Jamb/door jam. …
  • Head. …
  • Panel. …
  • Astragal. …
  • Fixed panel. …
  • Door sweep.


What do you call the wood at the bottom of a door?

Sill: The bottom or piece of a door. Also known as the threshold and usually come in aluminium or wood. Stiles: The outer pieces or edges of a door. These and rails form the frame of the door slab.

What is a mullion on a door?

A mullion is a vertical element that forms a division between units of a window or screen, or is used decoratively. … Horizontal elements separating the head of a door from a window above are both a head jamb and horizontal mullion and are called “transoms”.

What is the door code?

Your door code is a numeric code stored on the locks of the units you have access to. If you enter this code on the keypad of a lock that belongs to a unit you have access to, the lock will unlock. Your door code is unique to you and should NOT be shared with anybody.

What is a mid rail door?

A mid rail letter box : Inner and outer flaps are connected together through the door letter box aperture. … If both are fitted then they remain separate and do not connect through the door.

What are the vertical elements of a door called?

Vertical frame members are called “side jambs”; the top, horizontal piece is the “head jamb”; the bottom, horizontal piece is the “sill”.

IT IS INTERESTING:  Quick Answer: Do you have to have doors on your car in Texas?

What are stile lines?

fenmaster. 7 years ago. No, stile lines is where it looks like there is a seam/joint between the vertical and horizontal planes of the slab. As if four pieces of wood made the slab.

What is a panel door?

: a door having panels framed by stiles and rails of greater thickness — compare flush door.

What is the difference between a door jamb and a door frame?

A jamb is the flat surface that runs vertically up either side of the door frame. … This is where the hinges are placed to hang the door, as well as the striker plate on the opposite door jamb which helps you to open, close and lock your door. The door frame is all the elements combined.

What are the parts of a door jamb?

Parts of a Door: Learn About the Anatomy of a Door

  • Door Frame. Side jambs, head jambs, and mulls (oh my!) are the parts that make up the frame. …
  • Head jamb. The top horizontal section of a door or window frame is called the head jamb.
  • Side jamb. …
  • Mullion (mull)


How do you frame a door jamb?

Place the head jamb over the top ends of the side jambs. Use two or three 1 1/2-inch screws to fasten the head jamb to each side jamb, depending on how wide the jamb material is. When complete, you should have a door frame without a bottom piece. Install the door inside the jamb frame by assembling the hinges.

 Profil Doors