How do I change the battery in my Kwikset Smartcode 913?

How do you reset a Kwikset 913 Deadbolt?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset.

Why is my Kwikset lock not working?

Take the battery pack out of the unit and depress the button labeled “Program” three times if the unit doesn’t operate properly after installation or fails to open with a key. Allow ten seconds to elapse, then hold down the “Lock” button while reinstalling the battery pack.

Liberty SecurityПодписатьсяChanging Batteries on a Smart Door Lock

How do I change the battery in my Kwikset Smartcode 916?

Place the Allen wrench (provided) into the top of the screw head on the left side of the battery cover and rotate the wrench counterclockwise to remove the screw. Repeat this action for the remaining screws on the right side and bottom of the battery cover. Keep it in a safe place.

How do you reprogram a Kwikset lock?

How do I reset a code on my Powerbolt?

  1. Insert functioning key & turn 1/4 turn clockwise.
  2. Insert & remove the SmartKey learn tool. Remove functioning key.
  3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”
IT IS INTERESTING:  Can you remove Jeep doors with power windows?

How do you reset a Kwikset lock?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.

How do I factory reset my Kwikset SmartCode?

How to restore default settings on my SmartCode lever? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
  3. Press the Program button once more.

Why won’t my Kwikset lock stop beeping?

The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt. To turn the beeping sound off: … Reinstall the battery cover.

How do I reset my Kwikset lock after changing the battery?

Make sure there are no lithium NiCad batteries in use. If you’re replacing the battery because of a low battery warning, press and hold the Program button for five seconds, then press and hold button A for five seconds. Replace the battery pack. The lock will then restart.

How long do batteries last in smart locks?

Smart locks batteries usually last between 1 month to 2 years, depending on the lock’s brand, connectivity, and the type of batteries.

IT IS INTERESTING:  Are sliding doors more expensive than normal doors?

What happens if Smart Lock battery dies?

If your smart device battery dies, you can always use the Kevo fob or a standard key to unlock your door. You can also sign into the app on another supported smart device, and your eKeys will be instantly transferred to it. As with any lock, we recommend you have access to a backup key.

How long do Kwikset batteries last?

Replace batteries with new ones to ensure that lock is properly powered. Typical battery life based on 10 entries per day is 10-12 months if the door is properly aligned and the lock does not encounter interference in lock/unlocking the door.

 Profil Doors