How do I reset my Kwikset SmartCode 910?

How do I change the code on my Kwikset SmartCode 910?

How to add a user code on my Smartcode touchscreen?

  1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
  2. Press Checkmark symbol once.
  3. Enter Mastercode.

How do I factory reset my Kwikset SmartCode?

How to restore default settings on my SmartCode lever? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
  3. Press the Program button once more.

How do I factory reset my Kwikset 909?

How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. …
  3. Press the Program button once more. …
  4. Perform the door handing process again to teach the lock the orientation of the door.
IT IS INTERESTING:  Do Semihandmade doors come with hinges?

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I change the code on my Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do I reset my Kwikset smartkey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

25.10.2019

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

2.02.2012

How do I factory reset my Kwikset 913?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

IT IS INTERESTING:  Best answer: Can you use chalk paint on wood doors?

Why is my Kwikset lock not working?

Take the battery pack out of the unit and depress the button labeled “Program” three times if the unit doesn’t operate properly after installation or fails to open with a key. Allow ten seconds to elapse, then hold down the “Lock” button while reinstalling the battery pack.

How do you remove the code on a Kwikset door lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do I delete the code on my Kwikset 909 lock?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

 Profil Doors