How do you adjust the level on a Maytag refrigerator?
To raise your fridge, turn the wrench to the left, or counterclockwise. This will extend the leveling foot and raise the unit higher.
How do you adjust a French door Maytag refrigerator?
How to Align the Maytag Refrigerator Doors (Up and Down)
- To raise the door, turn the hex key to the right.
- To lower the door, turn the hex key to the left.
How do you lower the wheels on a Maytag refrigerator?
Adjusting the Leveling Legs:
- Remove the base grille.
- Turn the leveler or brake feet to lower or raise that side of the refrigerator. It may take several turns for the leg to reach the floor and to lift the roller off the floor. To raise, turn the leveler to the right. To lower, turn the leveler to the left.
How do you level a refrigerator from front to back?
For units with leveling legs:
- Remove the base grille. …
- Insert a flat blade screwdriver into the slots on the leveling leg and turn clockwise to raise the refrigerator or counterclockwise to lower it.
- The front of the refrigerator should be 1/4 inch higher than the rear. …
- Replace the grille.
How do you adjust the wheels on a Whirlpool refrigerator?
Legs are located on either side of the bottom of the fridge. Use your fingers to adjust the threaded leveling legs. If it’s difficult, then have someone tip the fridge back slightly and use a crescent wrench. Rotate the threaded leg clockwise to raise the front and counterclockwise to lower it in the front.
How do you adjust the height of a freezer?
For refrigerators with height-adjustable rollers, look for an adjustment screw near the top of the roller. It varies by model, but in most cases, using a screwdriver to tighten the screw (clockwise) will raise the front of the refrigerator and loosening (counter-clockwise) will lower it.
How do you reset the alarm on a Maytag refrigerator?
The Door Ajar Alarm feature sounds an alarm when the refrigerator door(s) or freezer drawer is left open for 2-5 minutes, depending on the model, and cooling is turned on. The alarm will repeat every 2 minutes. Close all doors to turn off and reset the alarm.
Why does my refrigerator door not close?
Make sure nothing inside the fridge is pushing the door open. … If the door seal looks fine but the door doesn’t seal shut and drifts open, the gasket may have become de-magnetised. You will either need to get the seal re-magnetised or replace it. If the door won’t fully close something may be obstructing the hinges.
Do Maytag Refrigerators have wheels?
This wheel is sold individually. It is located on the bottom of the refrigerator. … Locate and remove the wheel leveling screw from the front bottom corner.
How do I stop my fridge from rolling forward?
Since the rollers/wheels do not lock in place, it may help to place a piece of wood, a small wood wedge, or plastic furniture coaster (with felt on the bottom) under the wheels to prevent rolling. Re-level the refrigerator if necessary.
Can you take the wheels off a refrigerator?
In most cases the wheels are mounted to a plat that bolts to the bottom of the refrigerator. Should be able to remove each corner. In most cases the wheels are mounted to a plat that bolts to the bottom of the refrigerator.
What happens if Fridge is not level?
If the fridge isn’t level then you may experience decreased performance from your refrigerator. When your refrigerator drains water from the defrost system or when the ice maker is working, a fridge that is NOT LEVEL can cause issues with all these systems. Your new or old fridge will perform best when it is level.
Are refrigerators a standard height?
Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 ⅝ inches in depth.
Can you lie a fridge down to transport it?
If you do lay your fridge down to move it, you can lay it on its front or side, but it’s not recommended that you lay it on its back – the weight of the fridge’s body on its working parts could damage them, even if they’re not exposed.