Question: How do you reset the master code on a Kwikset 910?

Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.

How do I reset my Kwikset SmartCode 910?

How to perform a factory reset:

  1. Remove the batteries.
  2. Press and hold the lock button on the keypad.
  3. Place the batteries back in (while still holding the button)
  4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

22.08.2014

How do you change the code on a Kwikset lock?

Press the program button and look for the checkmark symbol.

  1. Press the checkmark symbol once.
  2. Enter new master code.
  3. Press lock symbol once.
  4. Re-enter master code.
  5. Press lock symbol once.

What is my Kwikset master code?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset auto lock?

1 Factory Reset

  1. Open your door.
  2. Extend the latch bolt.
  3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
  4. Push and hold the reset button for 10 seconds, until the lock beeps.
  5. The light ring will flash red, then spin amber.
  6. The lock has now been restored and is ready to be set up again.
IT IS INTERESTING:  Frequent question: What is a pneumatic door?

How do you clear the code on a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

2.02.2012

How do I reset my Kwikset smartkey lock without key?

Kwikset Smartkey – Rekey without Existing key

  1. Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
  2. Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
  3. Remove Cylinder. …
  4. Remove Retainer Clip. …
  5. Remove Plug from Housing. …
  6. Line Up Wafers. …
  7. Insert New Key and Let Tab Go.

25.10.2019

How do you change the code on a Kwikset 913?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

Is there a master key for Kwikset locks?

Total Key Control

Key management is now easier! Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.

IT IS INTERESTING:  Does cold weather affect my garage door opener?

How do you reset the master code on a door lock?

This lock is preset at the factory to operate at 0-0-0-0.

  1. With dials at 0-0-0-0, pull out the shackle.
  2. Turn shackle counterclockwise 90 degree (1/4 turn)
  3. Continue pressing shackle down and turn another 90 degree (1/4 turn)
  4. Set the dials to your own combination.
 Profil Doors