How do I reprogram my Kwikset SmartCode 909?
How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory reset
- Remove battery pack.
- Press and HOLD the Program button while reinserting the battery pack. …
- Press the Program button once more. …
- Perform the door handing process again to teach the lock the orientation of the door.
How do you program a Kwikset lock code?
It is recommended that you change it to a code of your own.
- Make sure the lock is unlocked and the door is open.
- Enter your Programming Code – for new installation, default is 0-0-0-0.
- Press enter arrow. You will hear one beep.
- Press 4 .
- Press enter arrow. You will hear one beep.
- Enter a new Programming Code.
How do I factory reset my Kwikset 909?
Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 3. Press the Program button once more.
How do you program a Kwikset 913?
How do I program my SmartCode 913 lock?
- Open the door.
- Remove battery cover.
- Press the program button once.
- Enter new user code.
- Press lock button.
- If programming is successful the keypad will flash green once, and you will hear one beep.
What is the master code for Kwikset lock?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do I reset my Kwikset smartkey lock without key?
Kwikset Smartkey – Rekey without Existing key
- Remove the lock from the door. In this example we will be using a Kwikset Kevo as the example Smartkey. …
- Remove Retainer Clip. This clip keeps the lock cylinder inside the housing. …
- Remove Cylinder. …
- Remove Retainer Clip. …
- Remove Plug from Housing. …
- Line Up Wafers. …
- Insert New Key and Let Tab Go.
25.10.2019
How do I delete the code on my Kwikset lock?
- Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.
- Press Checkmark symbol once.
- Press Lock symbol once.
- Enter Mastercode.
- Press Lock symbol once.
- Enter user code to be deleted.
- Press Lock symbol once.
- Re-enter user code to be deleted.
How do I change the code on my Kwikset SmartCode?
Enable the master code and follow these steps when the door is open.
- Press the program button once. The keypad flashes green and beeps three times.
- Press the lock button once.
- Enter master code.
- Press the lock button once.
- Press 9 six times.
- Press the lock button once.
- Press 9 six times.
- Press the lock button once.
How do I delete the code on my Kwikset 909 lock?
Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.
How do I factory reset my Kwikset 913?
A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.
Where is program button on Kwikset lock?
Changing the Code Step-by-Step
While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.