|Chain/Belt Drive Openers||Rail Length (Inches)|
|Dual Light (Front and Back)||10 Foot||154|
|Dual Light (Side-to-Side)||Standard||118|
How long is a garage door opener rail?
For example: A standard opener will open a door from 7 to 7-1/2 feet. If you cut 6 inches from the rail, the door will only open 6-1/2 to 7 feet.
How long is a garage door opener rail?
|Chain Drive Openers||Rail Length (Inches)|
|Dual Light(Front and Back)||116|
Do I need a rail extension for my garage door?
Answer: You will definitely need an extension kit. The opener is designed for a standard 7ft. door and therefore the rail (and belt on it) is only long enough to raise a door 7ft.
How long are garage door tracks?
Vertical track lengths range most commonly from six feet four inches up through 14 feet and four inches, and mostly in 12 inch graduations. Garage door tracks can be purchased in three widths, one, two and three inch. One-inch tracks find most common use in truck and semi-trailer door applications.
Are garage door rails universal?
In fact, every garage door that is manufactured comes with its own set of tracks. Although some companies do make rails that are adjustable, they rarely work universally. In other words, there’s a good chance that your next garage door replacement will have to be a complete replacement, parts and all.
What size garage door opener do I need for a 12 foot door?
½ horsepower motors are enough for doors that measure 8 feet to 12 feet wide range, but use a ¾ horsepower motor for doors that measure over 14 feet. Remember that an electric garage door opener is only meant to work as a substitute for human strength.
What is the difference between 1/2 hp and 3/4 hp garage door opener?
But what is the difference, and which one is right for you? 1/2 horsepower garage door opener is suitable for single garage doors and lightweight double garage. 3/4 horsepower garage door opener, on the other hand, is best for much heavier double garage doors, usually made of wood or insulated garage door material.
Can you raise a garage door track?
When you convert a regular garage door to a high lift one, a lot of the hardware that comprises the lift mechanism will need to be changed. … You’ll need new tracks so that the door can be lifted up along the additional height. You’ll also need new drums, cables, spring bar, springs and end bearing plates.
Can you use an extension cord with a garage door opener?
Extension cords are only supposed to be for temporary use, and every garage door opener manufacturer (that I’m aware of) prohibits this. An extension cord is simply one more place for something to potentially go wrong.
How do you size a garage door opener?
Measure the width and height of your garage door with a tape measure so you know what you have. Single garage door openers generally do fine with smaller openers, while double doors may need a little more horsepower. Doors that are 10 feet wide by 8 feet tall are single-car garage doors.
What is the minimum clearance for a garage door opener?
Most standard automatic openers require at least 15 inches of overhead clearance. This includes about 12 inches for the door and torsion springs and three inches for the garage door opener.
Why does my garage door have two tracks?
This second track is used for moving the top section of the door only, allowing the operator to easily move the top section far enough that the lower sections will follow on the lower track smoothly. This garage door track option also helps with doors that might have taller or oversized top sections.
How much clearance do you need for a garage door?
Most standard garage doors with extension springs require a minimum of 10 inches of headroom. Doors that use torsion springs require at least 12 inches of headroom.
Can you replace a garage door opener without changing the rails?
Can I reuse the old rails and parts when installing a new garage door opener? Although your new garage door opener may appear similar in design to your old opener, our recommendation is that you replace the entire opener. This includes mounting hardware, rails, wired door controls and wireless remote devices.
Can I put new garage door on old tracks?
Old tracks are often unsightly, and are one of the first things people notice. A track that is dull or rusty could really detract from your new door’s appearance, so you should always install a new one that matches. The amount of money you would save by holding on to your old track is negligible at best.
Can I replace a garage door without changing the rails?
Generally no, you cannot reuse the rail, they are not all exactly the same dimensions. There is no one standard size of profile, even within the same manufacturer, they change over the years.