Answer: The information included in the door schedule ensures the person in charge of the hardware specification has the appropriate hardware items for an opening—that, or it causes delays as information has to be clarified, updated, and amended.
Why schedule of doors and windows is important under architectural drawing?
The main purpose of incorporating schedules into a set of construction documents is to provide clarity, location, sizing, materials, and information on the designation of doors, windows, roof finishes, equipment, plumbing, and electrical fixtures.
What is a door hardware schedule?
A complete and accurate door schedule for a rear/exit door should include each of the following: Location of the opening, Dimensions, and Handing. Detailed frame type and specifications. Detailed door type and specifications. Hardware set to be referenced, general description of each item, and the quantity of each item …
What is a window schedule mean?
A tabulation, usually on a blueprint or in specifications, which lists all windows required on a construction job, indicating the sizes, number of lights, types, locations, and special requirements.
What should a Windows schedule include?
Window schedules include quantity, type, model, manufacturer, size, rough opening, materials, glazing, and finish. There is also usually a column for remarks/notes (Figure 9.5).
What are the purposes uses of a schedules?
The purpose of schedules is to accomplish recurrent tasks on a regular interval in order to free the Coveo administrator from having to perform these basic operations manually.
What are schedule drawings?
A schedule of drawings is an itemised list of drawings required for a building project. It can be included as part of an invitation to tender, or may be prepared as part of a design management plan. … Drawing types and purposes. Drawing numbers and revisions.
What should be on a door schedule?
Typical information contained on a door schedule might include:
- Code number (which corresponds with the drawings).
- Number required.
- Size (width, height, thickness).
- Colour and finish.
What is a door submittal?
The definition of a door hardware submittal is a collection of documents that contain all the pertinent information to complete a project. This compilation is based on the project manual, drawings and field conditions.
How do you read door specs?
For example a door may have a size of 2868 – the number alternates between feet and inches, first number is feet, second is inches, third is feet again and the last is inches. That makes that number 2′ 8″ x 6′ 8″. The first set of numbers, 2′ 8″ is the width, the second set, 6′ 8″ is the height.
How do you read a window plan?
Read a window size listed on a set of architectural drawings. It will look similar to “3050,” which specifics the window’s dimensions. The numbers represent a window that is 3-feet 0-inches wide by 5-foot 0-inches tall. The first digit is in feet and the second digit is the inches that a window is wide.
When using a window schedule where are the windows viewed from?
A typical schedule details the appearance of the window frame when viewed from the outside. It also shows the finished height and width of the frame. The height is usually shown to the left of the page and the width is shown across the top. Most schedules also show the stud opening size required.
How do you label a window on a floor plan?
WINDOWS: Windows are shown drawn within the walls on the floor plan and are indicated by three parallel lines. They may have the window size labelled on the window or a number. A number will correspond to a number on the window schedule.
What information does a finish schedule provide?
A finish schedule specifies the interior finish material for each room, space, and floor in the building. The finish schedule provides information for the walls, floors, ceilings, baseboards, doors, and window trim. Finish schedules can vary in both format and complexity.