Frequent question: How do I program my Schlage keyless entry?

How do you change the 4 digit code on a Schlage keypad lock?

Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. Wait for the “Schlage” button to beep and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.

How do you change the code on a Schlage Lock without code?

So first how to Reset Schlage Keypad lock?

  1. Disconnect the batteries.
  2. Press and hold the Outside Schlage Button.
  3. While holding the Outside Schlage Button, Reconnect the batteries.
  4. Release the Outside Schlage Button.
  5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

How do I find my Schlage code?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.

How do you remove the 4 digit code on a Schlage Lock?

Enter the four-digit entry code you want to remove— the “Schlage” button will flash and beep three times. Re-enter the same four-digit entry code for confirmation. The “Schlage” button will beep one long beep and flash green, indicating a successful deletion of your previous entry code.

IT IS INTERESTING:  Will Home Depot delivery remove refrigerator doors?

Where is the 6 digit code on Schlage Lock?

Note: To program your lock, you will need your 6 digit programming code which is located in the backside of your lock.

 Profil Doors