The heavy duty, commercial grade track hardware we sell for bifold doors and sliding closet doors will work with individual doors ranging from 1.1/8″ up to 1.3/4″ thick. Almost all of the bifold doors and sliding doors that we make are 1.1/4″ since they rarely need a lock.
What are standard sizes for bifold doors?
This is a list of common bifold door sizes that are fairly standard and readily available.
- 2′ 0″ x 6′ 8″ Bifold – Two 12″ Panels.
- 2′ 6″ x 6′ 8″ Bifold – Two 15″ Panels.
- 2′ 8″ x 6′ 8″ Bifold – Two 16″ Panels.
- 3′ 0″ x 6′ 8″ Bifold – Two 18″ Panels.
- 4′ 0″ x 6′ 8″ Bifold – Four 12″ Panels.
- 5′ 0″ x 6′ 8″ Bifold – Four 15″ Panels.
What is the rough opening for a bifold door?
Typically the rough bifold door opening should be sized 2 inches wider and 2 inches higher than the door itself, regardless of the bifold door size. For example a four-foot wide (48”) by six feet, eight inches high (80”) Bifold set of doors, would require a rough opening width of 50 inches and a height of 82 inches.
How wide are bifold closet doors?
You have to leave a little bit of space on each side for bracing when installing a bi-fold closet door. You have to include this space when taking measurements. The width of Bifold closet doors are usually 24/30/32/36 inches. Hence, you have to allow 6-12 inches for bracing.
How thick are sliding closet doors?
You can adapt standard interior doors to use as sliding closet doors. These doors come in 24-, 28-, 30-, 32- and 36-inch widths. The standard height is 80 inches, which you can trim to fit your closet’s opening.
Are bifold doors a good idea?
Are bifold doors a good idea for indoor spaces? Absolutely. They’re a wonderful way to enjoy flexible open plan living space. You can use them to separate off two rooms – a kitchen and a living room, for example – and have the option to open up them up in an instant when needed.
Can I cut down a bifold door?
Bifold door kits are much the same. They all have single doors that, when installed, hang on a rail system that moves them at angles to provide access to a closet or opening. When properly sized, they line up flat and fill the opening. … You can remedy this situation by trimming down one or more of the doors to fit.
What is the rough opening of a 32 inch door?
Measurements For Rough Opening
|Rough Opening Width||Rough Opening Height||Door Size to Order|
|29.75″ – 31″||81.5″ – 83″||28″|
|31.75″ – 33″||81.5″ – 83″||30″|
|33.75″ – 35″||81.5″ – 83″||32″|
|35.75″ – 37″ 37.75″-39″||81.5″ – 83″||34″ 36″|
What should the rough opening be for a 30 inch bifold door?
So, if you have a bedroom door that is 30″ wide (which is considered a 2/6 or 2′-6″ door) just add 2″ to the width and frame it 32″ wide. The height is 80″ (which is considered 6/8 or 6′-8″) add 2-1/2″ to the actual door height and frame it 82-1/2″ high.
What is the minimum width for bifold doors?
The minimum width for bifold doors is 1400mm. In order to fill this opening size, two individual 700mm wide door panels would be used. It is unwise to build them any smaller than this as they will bind when closing.
Can you cut a bifold door to fit height?
If you ordered a bifold door and find it’s a bit too long for the door’s height, it’s a simple matter to trim the door to fit.
Are bifold or sliding closet doors better?
Bifold doors are made of two small panels that fold into each other as they open. … Sliding doors are great for smaller rooms where there is less space to accommodate doors that open out and away from the closet.
Are mirrored closet doors dated?
Whether you’re renting a place or you’ve bought your home, perhaps you’ve come across sliding-mirror closet doors. In fact, often this feature is seen as outdated–a holdover from the glory days of ’80s design.
How tall can a closet door be?
The average closet door has a width of 30 inches and a height of 96 inches, though sizes can vary widely. Bi-fold doors are common closet door types, which have two panels for a single door and four panels for double doors. Bi-fold doors are available in a range of sizes to fit your needs.