How do I reset my Kwikset SmartCode 916?

How do I factory reset my Kwikset SmartCode?

How to restore default settings on my SmartCode lever? Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.
  3. Press the Program button once more.

How do you change the code on a Kwikset lock?

Press the program button and look for the checkmark symbol.

  1. Press the checkmark symbol once.
  2. Enter new master code.
  3. Press lock symbol once.
  4. Re-enter master code.
  5. Press lock symbol once.

How do you remove a code from a Kwikset lock?

Delete A User Code:

  1. Make sure the door is open.
  2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. …
  3. Press 2 to delete a user code. …
  4. Press Kwikset.
  5. Enter the user code you wish to delete. …
  6. Enter the user code again.
  7. Press Kwikset.

What app do you use for Kwikset SmartCode 916?

Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet.

IT IS INTERESTING:  Frequent question: How wide are garage door panels?

How do I factory reset my Kwikset 913?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

How do I factory reset my Kwikset 912?

Complete the following steps to factory default your Kwikset Z-Wave Lock.

  1. Remove the cover. Take off the lock’s cover. …
  2. Power down the lock. Remove the battery pack. …
  3. Press and hold “Program”. Press and hold the “Program” button. …
  4. Power on the lock. …
  5. Wait for confirmation. …
  6. Finish the reset.

3.04.2019

Can you reset a Kwikset lock without original key?

Rekeying a Kwikset Smartkey without a key has been our most popular request. The Smartkey has several parts to it, and many locksmiths do not touch them without an existing key.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

IT IS INTERESTING:  How do you remove an ignition lock cylinder without the key?

How do you unlock a Kwikset lock code?

To program the first user code:

  1. Press the button marked “program button” once.
  2. Using the keypad, enter a 4- to 8-digit code.
  3. Press the ‘LOCK” button to save the code.
  4. Extend the bolt by pressing- the “LOCK” button.
  5. Enter the new code number. The bolt should retract.

2.02.2012

Does the Kwikset SmartCode 916 have Bluetooth?

Kwikset SmartCode 916 Smart Lock has Bluetooth and Z-Wave connection options as out of the box.

 Profil Doors