Clear the lock mechanism — as indicated by the DOOR LOC light — by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.
How do I unlock my Kenmore Elite oven door?
Press and hold OVEN LOCKED for 3 seconds. The motor door latch will begin unlocking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.
How do you manually unlock an oven door?
If there is food in the oven, let the oven cool to room temperature and try to unlatch the door. If no food or utensils are in the oven, start a Self-Clean cycle, then hit the Clear/Off pad after 60 seconds. If that does not unlock the door, run a short Self-Clean cycle (1-2 hours).
What is oven lockout on Kenmore oven?
Kenmore Elite Ranges are designed with a lockout feature that automatically locks the oven door shut and makes the oven and cooktop controls inoperable. This feature can be used either during regular operation of the oven or during an oven’s self-cleaning procedure.
Why does my oven says door locked?
If the oven keeps flashing a locked door “F9” code, this indicates the door lock circuit needs to be fixed. In some instances, GE oven owners can easily fix it themselves, while in other cases, it’s best to contact GE for help.
Why is oven locked?
As a safety precaution, your range’s door will lock when the oven gets too hot. This is to prevent any possible injuries. If your oven is cool, then you may have Child Lock turned on or need to power cycle the range to unlock the door.
Why won’t my Kenmore oven turn off?
If you suspect the thermostat is defective, replace it. Sometimes, if the heating element burns out, it can short out to the inside of the oven. If the heating element has shorted out, the oven will not turn off. Often, if the bake element has shorted out, it will be visibly damaged.
How do I reset my Kenmore oven?
How to Reset a Kenmore Elite Stove Oven
- Press the “7” button on the Kenmore Elite keypad.
- Continue holding the “7” button for at least six seconds until a single beep sounds.
- Press the “Start” button on the keypad once. This will reset the oven back to the factory default settings.
Why is my self cleaning oven won’t unlock?
Door Lock Switch & Motor Assembly
If the door will not unlock at the end of the clean cycle then you may have a problem the door lock/motor assembly. You should first remove the power to the oven for a few moments and then reconnect. This may reset the control and allow you to unlock the door.
Why does my oven door not close?
Loose or Misaligned Hinges
Or your hinges might be clean and functional but misaligned. Look for the bolts that secure your hinges to the door or to the oven. … If you can bend them back into place and/or tighten the bolts so that the hinges are aligned again, your oven door will close again.
What does F3 mean on Kenmore oven?
The “F3” fault indicates an open oven sensor probe or an open sensor circuit. The oven temperature sensor is no longer available. The oven temperature sensor circuit also has thermal fuse connected in a series circuit in one of the two wires in the sensor circuit.
What does F90 mean on a Kenmore stove?
The F90 error code indicates that the door unlock time exceeded. This will happen if the lock is in the locked position with the oven door open or if the lock motor fails.