How do you reprogram a Schlage door lock?

How do you change the 4 digit code on a Schlage Lock?

Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. Wait for the “Schlage” button to beep and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.

How do you change the code on a Schlage Lock?

To change the six-digit programming code to one of your own choosing:

1. Enter the existing six-digit code.
2. Press the “Schlage” and then the “3” keys.
3. When three orange flashes and three beeps occur, enter a new six-digit code.
4. When three orange flashed and three beeps occur again, reenter the same new six-digit code.

How do you reprogram a Schlage lock without the code?

So first how to Reset Schlage Keypad lock?

1. Disconnect the batteries.
2. Press and hold the Outside Schlage Button.
3. While holding the Outside Schlage Button, Reconnect the batteries.
4. Release the Outside Schlage Button.
5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

Why does my Schlage Lock unlocks without code?

It’s likely that when the unit was installed, the dead bolt was in the locked position. It needs to be installed (two sides joined together) when in the unlocked position. see less The Feb 23rd solution that everyone likes works by turning off the function that lets you lock without entering a code.

Where is the 6 digit code on Schlage Lock?

Note: To program your lock, you will need your 6 digit programming code which is located in the backside of your lock.

How do I reset my Schlage be468?

9. Factory Default Reset

1. Disconnect the batteries. …
2. Press and hold the Schlage Button.
3. While holding the Schlage Button, reconnect the batteries.
4. Release the Schlage Button.
5. The inside indicator and green check will blink if the Factory Default Reset is successful.
6. .

26.01.2021

How do I find the code for my Schlage Lock?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.