HOW OFTEN SHOULD INTERNAL FIRE DOORS BE CHECKED ? Every six months or even every three months in a busy building. Whenever possible, employ a registered FDIS inspector to check your fire doors.
How often should fire doors be inspected?
All fire doors should be inspected every six month.
Do fire doors need to be inspected annually?
As such, a fire door should be regularly checked to ensure it functions correctly and will perform to its designed standard in the event of a fire. Periodic checks should be carried out at least once every six months although newly occupied buildings may require more frequent checks in the first year of use.
What is the mandatory requirement to inspect fire doors?
Just as any other product that has been designed to save lives, fire doors need to be inspected often to make sure they are functioning properly. They should be inspected just as a smoke detector or fire alarm is regularly checked. If there is any alteration to the fire door, it can affect the performance of the door.
Do fire doors need servicing?
In order for fire doors to perform effectively in the event of a fire, regular inspections should be undertaken to ensure their structural integrity and functionality. Six-monthly inspections are recommended by BS 9999 in addition to the monthly inspection checks outlined within the government guidance documentation.
What is the maximum gap under a fire door?
Gaps between fire doors and the door frame should never be more than 4mm or less than 2mm. It’s recommended to aim for a 3mm gap to ensure adequate room for the intumescent strips to activate in the event of a fire, and for the smoke seal strips (if installed) to not get damaged by the opening and closing of the door.
How do you check a fire door?
What do I need to check on a fire door?
- Check that the door is closing ‘to latch’ automatically: Open the door halfway and let it go – it should close to latch. …
- Ensure that the smoke seals are in place and undamaged. …
- Check that there are no penetrations or damage to the door.
How long do fire doors last?
Fire doors are usually certified to hold back fire for 30 minutes (FD30) or 60 minutes (FD60).
Can anyone inspect fire doors?
If possible, employ a registered FDIS inspector to check your fire doors. These are people that have achieved a diploma in fire doors and have had their competence and knowledge independently assessed.
Who can maintain fire doors?
Fire Door Inspection London
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person in your building/s should carry out regular checks of the fire doors within your premises to ensure fire doors are repaired and maintained as fit for purpose.
What is the British Standard for Fire Doors?
Fortunately for the industry, BS 8214 is the benchmark standard for the correct installation and maintenance of timber-based fire doors.” … BS 8214 no longer covers door sets, which are covered in BS EN 16034.
Who should you report a damaged fire door to?
never propping open a fire door. reporting any doors in your block that look like they may not meet the required standard by calling 0800 358 3783.