The average measurement is at 30 inches wide and 80 inches tall. The size of your closet door can vary depending on the architecture of the room and the type of closet door you have. For instance, a simple door that opens like a door or out of a room will likely take up less space than a set of sliding doors would.
How wide are wardrobe doors?
|Door Width||600 mm|
|Height||2180* (2180mm plus 45mm scribe)|
What are standard wardrobe door sizes?
Classic 35mm – Steel Sliding Wardrobe Systems
Doors are available in 1, 3 & 4 panel designs, 610mm, 762mm & 914mm widths and fit a height of 2260mm. Prices include FREE trackset. PLEASE NOTE-If including Soft Close Upgrade in your Order the Opening Height will extend to 2286mm.
How wide should Built in Wardrobes be?
Walk in Wardrobes
Minimal recommended sizes for a WIR is 1430mm wide x 1500mm or desired depth. 900mm between walls and shelving / hanging allows comfortable egress, alternatively anything less will close in the WIR making it too tight to access clothes and storage.
How deep is a standard fitted wardrobe?
An ideal internal depth for hanging space is 600mm, but this may not always be possible. A 500mm depth should be the very minimum. Drawers come in a variety of different depths – the minimum is 355mm and generally the maximum is 500mm. This will depend on what they are to be used for, from jewellery to jumpers.
What width is a standard double wardrobe?
These wardrobes are available in any height up to 2400mm (excl legs), any depth up to 680mm and any width up to 1200mm.
How much smaller should a door be than the opening?
Check the door fit. Ideally, there should be a gap of about 1/8 inch at the top and along each side, and about 3/8 inch at the bottom.
How do you get fitted wardrobes out?
Insert a crowbar behind the wardrobe and against the wall behind the wardrobe. The space may be tight, but the crowbar is slender enough that it can fit into small spaces. As you gently pull back toward yourself with the crowbar, you will release the fitted wardrobe from the wall bit by bit.
How do I measure my wardrobe?
- Take a photo of the area where you want the wardrobe.
- Measure height from floor to ceiling and floor to cornice. …
- Measure the width. …
- Measure the depth from front to back on both ends of the wardrobe.
- Measure the distance from the back of the wardrobe to the start of the window architrave.
How high should a hanging rail be in a wardrobe?
A typical closet can include two levels of hanging rods. As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement.
Do fitted wardrobes cause damp?
Fitted bedroom wardrobes are often a magnet for damp and mould because they can cut off the circulation of air behind them. For other areas in the home, such as windows and walls, mould can be scrubbed off easily with a combination of bleach and water.
Should fitted wardrobes have backs?
“We generally advise that you don’t decorate your room prior to fitting,” says Rachel. “However, as our wardrobes are fitted without backs and sides as standard, if you’re planning to redecorate the walls, then you may wish to do this before installation as these walls will be on show when the doors are open.
Do fitted wardrobes add value to house?
Excess space within a home is a premium. Making the most of the space you have, particularly unused spaces is a great way to add value. Bespoke fitted wardrobes are a great way to maximise space and they are designed to last for years to come.