A receptacle outlet must be installed so that no point along the wall space is more than 6 ft, measured horizontally along the floor line, from a receptacle outlet. … (1) Any space 2 ft or more in width, unbroken along the floor line by doorways, fireplaces, and similar openings.
How far does a receptacle have to be from a door?
The NEC basically states that within any living area of a home, you must have an electrical receptacle (outlet) 6 feet from any obstruction or break in the wall, such as a doorway, and no more than 12 feet from the previous electrical receptacle (outlet), Figure 1.
What is code for wall outlet?
The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every six feet measured along the floor line.
Can a receptacle be behind a door?
The bottom line for all receptacle placement is that from any given point along a wall, should always be no more than 6 feet from a receptacle. A Doorway isn’t a wall and the area behind a door is an inappropriate location for electrical devices.
What is the NEC code for outlets?
Article 210.52(A)(1) states: Receptacles shall be installed such that no point measured horizontally along the floor line of any wall space is more than 6ft from a receptacle outlet. … Hallways more than 10 feet long must have at least one electrical outlet, preferably at the mid-point.
How many receptacles can be on a 20 amp circuit?
One rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.
Do you have to have an outlet on every wall?
A receptacle outlet must be installed in every kitchen, family room, dining room, living room, sunroom, parlor, library, den, bedroom, recreation room, and similar room or area so that no point along the wall space is more than 6 feet, measured horizontally along the floor line, from a receptacle outlet [210.52(A)] ( …
Are tamper resistant outlets required by code?
Receptacles for garage-door openers located more than 5½ feet above the floor are required to be tamper-resistant. Floor receptacles located more than 18 inches from the wall are required to be tamper-resistant, even though 210.52 does not specify these receptacles as required receptacles.
How many outlets can be on a breaker?
However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.
How many outlets can be on a 15 amp breaker?
Generally, homes have eight to 10 outlets on a 15 amp breaker but not all are used at the same time. Lights and outlets are normally wired on separate branch circuits, which means that the lights will be protected by a separate circuit breaker to the one which protects the outlets.
How high are floor outlets?
A common height for a wall outlet is between 12 to 18 inches AFF (above finish floor). In rare instances, outlets are still installed in baseboards and in the floor with proper box/covers.
How close can an electrical outlet be to a water source?
According to the National Electric Code, any receptacle within 6 feet of a water source needs to be protected with a GFCI.
Can outlets be installed under Windows?
Wall space where you put electrical outlets is defined as not being broken by fireplaces, moving wall panels and doorways. … Therefore, outlets can be installed below a window.