Quick Answer: Where is the 6 digit code on Schlage Lock?

Note: To program your lock, you will need your 6 digit programming code which is located in the backside of your lock.

How do I find the code for my Schlage Lock?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.

Where is the Schlage 6 digit code?

The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. You must remove the keypad from the door to see the sticker.

How do I reset my Schlage keypad lock without code?

So first how to Reset Schlage Keypad lock?

  1. Disconnect the batteries.
  2. Press and hold the Outside Schlage Button.
  3. While holding the Outside Schlage Button, Reconnect the batteries.
  4. Release the Outside Schlage Button.
  5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

How do you change the 4 digit code on a Schlage Lock?

Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. Wait for the “Schlage” button to beep and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.

IT IS INTERESTING:  Do Storm doors help?

How do you remove the 4 digit code on a Schlage Lock?

Enter the four-digit entry code you want to remove— the “Schlage” button will flash and beep three times. Re-enter the same four-digit entry code for confirmation. The “Schlage” button will beep one long beep and flash green, indicating a successful deletion of your previous entry code.

How do you reset a Schlage Lock?

Reset the Schlage lock by engaging the reset button if one is available, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.

Why does my Schlage Lock unlocks without code?

It’s likely that when the unit was installed, the dead bolt was in the locked position. It needs to be installed (two sides joined together) when in the unlocked position. see less The Feb 23rd solution that everyone likes works by turning off the function that lets you lock without entering a code.

 Profil Doors