Why do door hinges have to be recessed?

Almost all door hinges are recessed into the side of the door. This makes the door shut tight without any gaps. … It involves peeling only a small amount of wood from the side of the door for the hinge to fit flush on the side of the door.

Do door hinges need to be recessed?

It must be straight in order for the hinge to work properly. It must also be recessed deep enough to allow it to work. If it is too deep, the hinge may pull loose when it is closed. Put the hinge in place and trace the holes in the hinge onto the wood.

What is the recess for a hinge called?

A mortise is a recess or hollow space cut to fit a specific item, such as a door hinge or a lock mechanism. Mortising for a door hinge allows the hinge to install flush with the surface of the door edge or face.

What router bit do I need for door hinges?

Top 6 Picks of Best Router Bits to Use for Door Hinges

  • Yonico 14169q 1/2-Inch Carbide Flush Trim Router Bit – Best Router Bit for Cutting Door Hinges. …
  • Shank Woodworking Top Bearing Flush Trim Bit – Best Door Hinge Mortising Router Bit. …
  • Ryobi A25R151 Carbide Edge 15 Piece Router Bit Set for all Woodwork Projects.
IT IS INTERESTING:  What is the best black color for front door?


Is there a tool to cut out door hinges?

Dremel is perhaps the best door hinge cutting tool you can use. It is a versatile tool that is very similar to a drilling machine. It is also known as a sanding machine or multi-saw grinder.

Will Home Depot cut door hinges?

NO, they do not cut doors for customers. They will cut blinds, black pipe (some locations). They do in some locations have a track saw, but I have never seen them cut a door.

How deep should hinges be?

The top hinge should be located 5 to 7 inches from the top of the door, the bottom hinge 10 to 11 inches from the bottom of the door and the middle hinge should be centered between the two. Step 2: Use the hinge thickness as a gauge to mark the depth of the mortise along the side of the door or jamb.

How do you install door hinges on a door jamb?


  1. Place your hinges in the correct location. Assuming you’re installing a new door, you’ll need to find the precise location on the door frame for your hinges. …
  2. Trace around the hinge. …
  3. Cut the mortise. …
  4. Mark the location of the screws. …
  5. Drill the pilot holes. …
  6. Install the individual hinges. …
  7. Connect the door to the jamb.

Can you use a Dremel for door hinges?

The Dremel tool with plunge router attachment can quickly install door hinges. … With the plunge router attachment, the Dremel transforms into a surface router that can handle the size, speed, and detail of many small jobs. Mounting door hinges with the Dremel makes for fast, precise work.

IT IS INTERESTING:  How wide are most doors?

Can you use a trim router for door hinges?

Making a door hinge mortise can be done with a chisel, but it’s more efficient with a standard trim router. I use a 1/4″ straight bit inside a standard guide collar for this task.

What is the difference between a mortising bit and straight bit?

What’s the difference in a hinge mortise bit and a straight cut bit?? … Duane, hinge mortise bits also cut a flat bottom without burning. Their blades have a cutting edge with more chip clearance on the end, where straight pattern bits usually do not.

 Profil Doors